Vapor-liquid separator 12mm~76mm

Description

YB series gas-liquid separators adopt an internal elbow design to prevent internal splashing and help the accumulation of oil at the bottom of the separator.

The gas separator should be arranged as close to the suction end of the compressor as possible.

Product name: Vapor-liquid separator

The gas-liquid separator adopts an internal elbow design to prevent internal splashing, which helps the accumulation of oil at the bottom of the separator, and is installed as close to the compressor as possible.

1. Solid copper interface;

2. The U-shaped elbow design ensures refrigerant flow and less oil interception;

3. The protective net and small hole assembly on the U-shaped elbow prevent foreign matter and dirt from affecting the throttling work;

4. The U-shaped elbow inlet is located behind the inlet pipe guide to prevent liquid from entering the compressor and causing damage;

5. Anti-corrosion electrostatic spraying process on the surface to prevent rust on the outside of the casing.

Technical Parameters:

1. Refrigerant: CFC, HCFC, HFC;

2. Working pressure: 3.5Mpa;

3. Medium temperature: -50~+120 degrees.